|
|
|
|
US$0.25
|
|
|
|
100ml measure and testing cylinder. Made of chemical tolerant plastic. Fits 25cm Oeschlemeter/Hydrometer and 25cm Alcoholmeter.
Not available to US addresses.
|
US$5.49
|
|
|
|
13" high Glass testing cylinder
|
US$5.99
|
|
|
|
250ml measure and testing cylinder. Made of chemical-tolerant plastic. Fits most Oeschlemeters/Hydrometers and Alcoholmeters.
|
US$11.95
|
|
|
|
30cm (12") long laboratory-grade, high-accuracy Alcoholmeter. Alcoholmeters are for reading alcohol content in distilled spirits only, and will not work on an un-distilled mash.
Currently not available to US addresses.
|
US$5.99
|
|
|
|
A professional alcoholmeter with built in thermometer. Alcoholmeter measures from 30-60% abv. Alcoholmeters are for reading alcohol content in distilled spirits only, and will not work on an un-distilled mash.
|
US$14.95
|
|
|
|
Solid rubber stopper. Can be easily drilled to fit airlock, thermometer, etc.
|
US$2.00
|
|
|
|
Solid rubber stopper. Can be easily drilled to fit airlock, thermometer, etc.
|
US$5.00
|
|
|
By Brewhaus(America). A complete stainless steel filter system that can be disassembled for easy cleaning and storage. Includes a filter end cap that accepts 1/2" chemical-tolerant hose (included). Large capacity reservoir eliminates the need to constantly 'top-up'.
Currently Out of Stock
|
US$129.99
|
|
|
|
40mm diameter filter unit. Made of chemical-tolerant plastic. Includes RF Clamp, Funnel Holder, and starter pack of filter papers. Fits 220mm funnel.
|
US$29.95
|
|
|
|
Commercial Grade Filter Papers, box of 100
|
US$22.95
|
|
|
|
Allows you to attach hose directly to filter unit.
|
US$4.95
|
|
|
|
Large Capacity, 220mm diameter funnel made of chemical-tolerant plastic.
|
US$9.89
|
|
|
|
For sealing between funnel and filter unit.
|
US$2.39
|
|
|
|
1100W electric hotplate with tubular element.
Currently out of stock in Canada.
|
US$34.95
|
|
|
|
1500W Electric Hotplate with solid cast iron element. Top end, commercial grade unit.
|
US$119.99
|
|
|
|
30cm, dual scale Hydrometer. Used for reading density of a mash, and to confirm completion of fermentation, or to calculate the alcohol content from fermentation by using readings at the start and end of fermentation. Hydrometers will not work in a distilled spirit.
|
US$5.99
|
|
|
|
Pro Quality Hydrometer, for end of ferment only. Used for reading density of a mash, and to confirm completion of fermentation, or to calculate the alcohol content from fermentation by using readings at the start and end of fermentation.
Not available to US addresses.
|
US$23.95
|
|
|
|
Digital pH Meter with +/- 0.1pH accuracy
|
US$34.95
|
|
|
|
Adjustable metal hose clamp for holding filter papers in place on the bottom of a filter unit.
|
US$4.29
|
|
|
|
Chain for cleaning kettles without damaging stainless steel
|
US$5.95
|
|
|
|
Water pump for circulating cooling water
|
US$19.99
|
|
|
|
Laboratory grade thermometer
|
US$8.99
|
|
|
|
Digital cooking thermometer 0-120C. Food grade, can be used in fermentations, fruit mashes, mash etc.
Only available shipped from Canada.
|
US$18.95
|
|
|
|
Our Wireless Digital Thermometer is very well built, with an active range of 100 feet, and an accuracy of +/- 1 degree. Excellent for keeping an eye on temperatures while relaxing in another room. This thermometer is also fantastic for grilling or smoking!
|
US$28.95
|
|
|
|
Replacement probe for Wireless Digital Thermometer
Currently Out of Stock
|
US$4.95
|
|
|
|
Permanent stick-on thermometer for fermenters.
|
US$1.49
|
|
|
|
Rubber grommet for laboratory thermometer
|
US$0.99
|
|
|
|
Chemical tolerant rubber grommet for wireless digital thermometer. 1/8" hole.
|
US$0.49
|
|
|
|
Stainless Steel Tri-Clamp. For use with 2 inch Tri-Clamp ferrules.
|
US$9.95
|
|
|
|
Highly chemical-tolerant gasket for 2 inch Tri-Clamp ferrules. Not used for attaching a tri-clamp ferrule to a standard US beer keg.
|
US$0.99
|
|
|
|
Highly chemical-tolerant o-ring for connecting a 2 inch Tri-Clamp ferrule to a standard US beer keg.
|
US$0.69
|
|
|
|
316L Stainless Steel ferrule for welding to 2in tube or top of boiling vessel
|
US$9.95
|
|
|
|
316L Stainless Steel ferrule for welding to 2in tube
|
US$7.95
|
|
|
|
Stainless Steel Tri-Clamp. For use with 3 inch Tri-Clamp ferrules.
|
US$14.95
|
|
|
|
Highly chemical-tolerant gasket for 3 inch Tri-Clamp ferrules. Not used for attaching a tri-clamp ferrule to a standard US beer keg.
|
US$1.49
|
|
|
|
316L Stainless Steel ferrule for welding to 3in tube or top of boiling vessel
|
US$16.95
|
|
|
|
316L Stainless Steel ferrule for welding to 3in tube
|
US$14.95
|
|
|
|
2" male NPT to 2" Tri-Clamp coupler. Allows you to easily adapt a copper column to a Sanke keg or Tri-Clamp fitting by using a 2" female NPT fitting on your column. Includes a stainless steel screen. Requires 2" Tri-Clamp and O-Ring.
|
US$28.95
|
|
|
|
316L Stainless Steel adapter for attaching 3in. Tri-Clamp to a standard US beer keg or 2in. Tri-Clamp fitting. Does not include Tri-Clamp or O-Ring.
|
US$28.95
|
